Posted: December 5th, 2022

ITNW2421 – Networking with TCP/IP

ITNW2421 – Networking with TCP/IP
Final Project
OBJECTIVE:
The purpose of this group/individual project ( help with nursing paper writing from experts with MSN & DNP degrees) is to demonstrate that you can transfer the skills you have
learned this semester to a real life scenario. You will create a fully functional network for a company of
your own creation with the following requirements:
• One headquarters with at least 2 branch offices
• For the first branch, implement EtherChannel
• For the second branch, implement a FHRP or WLAN using a WLC and LWAPs
• Implement at least 4 VLANs per site
• Implement PortFast and BPDU Guard for all end devices
• Implement subnetting for all LANs and WANs
o Make sure to use a subnet that will not waste unnecessary addresses on the WAN
• Implement static routing
o Static routes for all your networks
o Static routes will also be used for backup or gateway of last resort purposes
• Save all configurations
You will use Packet Tracer to implement the network. All network equipment will be fully configured
and properly secured. If you will be using a local database for access, include a username and password
that I can use to access your network in the network documentation.
RUBRIC:
Network configuration (90 pts.)
– All lines (console and VTY) properly secured (10pts)
– Use SSH rather than Telnet (5pts)
– Display warnings on all intermediary devices (5pts)
– Interfaces on switches (key interfaces only) and routers (LAN & WAN connections) fully
configured with descriptions (5pts)
– Interfaces with end devices configured with PortFast and BPDU Guard (5 pts)
– Implement EtherChannel for first branch (10 pts)
– Implement a First Hop Redundancy Protocol or WLAN using a WLC and LAPs for the second
branch (20 pts)
– Have at least one server in your Headquarters and implement port security for its interface
(5pts)
o Use sticky secure MACs
o Shutdown violation mode
o Maximum of 1 MAC
– VLAN configuration (10pts)
o Minimum of 4 VLANs per LAN
o Native VLAN for trunking purposes and Management VLAN for network devices and
configuration purposes (ie: IT staff) is required
– Implement DHCP using a router for at least one VLAN (5pts)
– Routing configuration (10pts)
o Implement static routing
o Static route for backup purposes (floating static route) or to establish and propagate
a Gateway of Last Resort (default static route)
Network documentation (10 pts.)
IP address scheme – Use Excel to create the IP address scheme. (10 pts.)
– VLANs
o Subnets in use and for future use
– Addressing Table for Network Devices and Hosts
o Static IP addresses in use and available for future use
o DHCP pools (if configured on router)
Deliverables
– Packet Tracer File
– Network Documentation

Order | Check Discount

Tags: ITNW2421 – Networking with TCP/IP