Posted: July 7th, 2022

DEPARTMENT OF MECHANICAL & AEROSPACE ENGINEERING

DEPARTMENT OF MECHANICAL & AEROSPACE ENGINEERING
Pro-forma to accompany assignment / coursework 2019/2020
Module Code: MN5552 Module Leader: Xinli Du Assessor: Xinli Du
Module Title: Robotics and Manufacturing Automation
Assessment Title: MATLAB controller design Weighting: 30%
Main objectives of the assessment: To obtain an understanding of controller design using MATLAB.
Brief Description of the assessment: The work will model a system and design controllers for it.
Learning outcomes for the assessment:
• Knowledge of system modelling and controller design
• Knowledge of MATLAB and Simulink programming
Assessment and marking criteria
The students will be required to:
Submit a report, which meets objectives, format
and deadline.
Assessment method by which a student can demonstrate learning outcomes:
One single written report
Format for the assessment/coursework (Guidelines on the expected format and length of submission):
The maximum page limit is 8. Graphs and tables may be attached in the appendix, for which there is no page
limit. The maximum text size is 12. Please use single line spacing.
Assessment date/submission deadline:
Please submit online a single file via WISEflow module assessment – student id on front page. Contact
your Course Administrator if queries.
Note: automatic plagiarism checks are made
Indicative Reading List:
MATLAB tutorial notes
Lecture notes for modelling, transfer function, controller design, and state space representation.
Further information:
The work submitted must be student’s own interpretation of the data, based on own visit to the
laboratory. No images/data from other sources including books and WWW are necessary and
should not be included in the report; if done so will be excluded from marking.
Assessment date/submission deadline:
Please submit online a single file via WISEflow module assessment tab– student id on front page.
Contact your Course Administrator if queries. Note: automatic plagiarism checks are made
MARKING CRITERIA
[80‐100]: In addition to [70‐79], additional marks will be awarded to the quality of explanations of the
controller design progress and performance analysis. For example, explanation of changing
controller parameters and principle of the controller chosen.
[70‐79]: All MATLAB programs and results are correct. Details of the controller design are provided
and good analysis of the controller performance.
[60‐69]: The MATLAB programs and results related to majority of tasks are correct and correct. Details
of the controller design progress are provided.
[50‐59]: The MATLAB programs and results related to over half of tasks are correct.
[40‐49]: The MATLAB programs and results related to 1/3 of tasks are correct.
[30‐39]: The programs fail to execute and the presented results are incorrect. However, some good
efforts have been made to complete all tasks. Some progress is presented.
[0‐29]: Suitable marks will be given based on the answers produced and the effort made.
DC motor controller design
Consider a DC motor with following parameters:
= . ∗
/
= .
= .
= .
= . /
= . /
Consider the rotation speed is the output of the DC motor.
P1. Please provide transfer function and state space model of a DC motor and plot block diagram. The
input to the system is the applied voltage. The output of the system is the rotation speed of the
motor. (10%)
P2. In MATLAB, plot the step response of the provided DC motor, using both the transfer function and
state space model. Please provide MATLAB code or a Simulink model. (10%)
P3. In MATLAB, please design a P, PI and PID controller of the provided DC motor. Please compare the
results of different controller and different parameters used of the controller, i.e. compare rising
time, settling time, steady state error, overshoot, etc. Please provide MATLAB code or a Simulink
model. (40%)
P4. Please design a state feedback controller of the provided DC motor. Please provide the design
progress, and the step response of the designed controller. Please analysis the step response of the
designed controller. (40%)

———

MECHANICAL AND AEROSPACE ENGINEERING DEPARTMENT
2019/2020 Pro-forma to accompany assignment/coursework

MN5552 is the module code. Xinli Du is the module leader. Xinli Du is the assessor.

Robotics and Manufacturing Automation is the title of the module.

MATLAB controller design is the title of the assessment. 30 percent weighting

The assessment’s main goals were to gain a grasp of controller design using MATLAB.

The job will model a system and design controllers for it, according to a brief description of the assessment.

The following are the assessment’s learning outcomes:

• Understanding of controller design and system modeling

• Programming skills in MATLAB and Simulink

Criteria for Assessment and marking

Students will be expected to:

Submit a report that satisfies the objectives and is formatted properly.

and deadline.

Assessment method by which a student can demonstrate learning outcomes:

One single written report

Format for the assessment/coursework (Guidelines on the expected format and

Order | Check Discount

Tags: best master thesis writing service, best thesis writing services, cheap thesis writing services, master thesis help, master thesis writing service, online thesis writing services